HSA Series Spring Angularity Hangers are designed to isolate low frequency vibrations in suspended piping and equipment - preventing transmission of vibration to the building structure through the piping systems. The products incorporate a color-coded steel spring for ease of identification in the field. Load ranges from 21 - 8,200 lbs. and up to deflections of 3". Custom sizes and deflections up to 5" available upon request.
VMC Group 30° angularity hangers have a 30° misalignment capability, spring diameters and hanger box lower hole sizes are sufficiently sized to permit the hanger rod to swing approximately 30° before contacting the box.
The HSA Series also offers the capability to incorporate eyebolt hardware to accommodate duct strap connections and/or pencil rods, when isolating ductwork and suspended ceilings.
Features & Benefits
- Loads from 21 - 8,200 lbs. with static deflections up to 3” provide flexibility over a wide range of applications
- Pre-compressed hangers offer quick and easy installation in even the most challenging locations
- Lower hanger rod enables a 30⁰ swing to compensate for rod misalignment and prevents short circuits to the hanger box
- Color-coded springs provide easy identification of spring hangers for installation and inspection
Applications
- Suspended piping
- Suspended electrical services
- Suspended equipment
- Suspended ductwork
DOWNLOADS
Spec Sheets
Submittal Drawings
- 1" Deflection
- Model HSA-1B 20-85 lbs. Spring angularity hangers 1 inch deflection_rev.4
- Model HSA-1C 50-370 lbs. Spring angularity hangers 1 inch deflection_rev.4
- Model H2SA-1E 2800-6500 lbs.Spring angularity hangers 1 inch deflection_rev.6
- Model HSA-1E 195-2000 lbs. Spring angularity hangers 1 inch deflection_rev.4
- Model HSA-1G 3600 lbs. Spring angularity hangers 1 inch deflection_rev.4
- 2" Deflection
- Model HSA-2D 75-845 lbs. Spring Angularity Hangers 2 inch deflection_rev.5
- Model HSA-2E 80-2050 lbs. Spring angularity hangers 2 inch deflection_rev.4
- 3" Deflection
- Model HSA-3C 75-600 lbs. Spring angularity hangers 3 inch deflection_rev.4
- Model HSA-3E 1600-3500 lbs. Spring Angularity Hangers 3 Inch Nominal Deflection_rev.1
- 4" Deflection
- Model HSA-4C 65-1460 lbs. Spring Angularity hangers 4 Inch Nominal Defelction_rev.1
RELATED SERVICES
The engineers we employ hold the highest industry-recognized credentials in structural analysis, elastomer development and system dynamics.
We are the first ISO accredited PCA ISO-17065, third-party certification body for special seismic certification of non-structural building components and their mounting configurations by the ICC’s International Accreditation Service.
We are the only ISO 17025:2005 Accredited Seismic Simulation Test Laboratory with a triaxial shake table owned and operated by California licensed Structural engineers.
Testing Services Update
DCL now offers Nuclear Qualification and Testing services.
In partnership with Greenberry Industrial, we now offer testing services that meet the requirements of ASME NQA-1.
